PIXEL DISTRIBUTOR

CONVENTIONAL FIRE ALARM SYSTEM

Conventional Fire alarm system

2 &4 Zone Conventional Fire Alarm Panel with Ethernet Port / GSM Facility RE-102R/ RE-104R

  • 2/4 Zone Conventional Panel
  • 16 * 2 Dot Matrix LCD Display
  • Tactile Keypad for easy operation
  • SMPS Power Supply
  • 100 Alarm Event Log with RTC
  • TCP-IP  / GSM Facility (Optional)
  • FRABS Plastic Housing
  • IP 60 Rated

CONVENTIONAL ALARM DETECTORS

Detector of Addressable fire alarm system

Conventional Smoke Detector
(UL Listed)
RE-316S-2L

  • UL listed.
  • Dual LED’s for 360° visibility.
  • Advanced detection and communication protocol.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.
Heat detector of Addressable fire alarm system

Conventional Heat Detector
(UL Listed)
RE-316H-2L

  • UL listed.
  • Dual LED’s for 360° visibility.
  • Polarity free wiring
  • Advanced detection.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.
Multisensor detector of Conventional fire alarm system for Fire detection system

Conventional Multisensor Detector
(UL Listed)
RE-316HS-2L

  • UL Approved.
  • Dual LED’s for 360° visibility.
  • Advanced detection and communication protocol.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.
Detector of Addressable fire alarm system

Conventional Smoke Detector
(CE Approved)
RE-326S-2L

  • CE Approved.
  • Dual LED’s for 360° visibility.
  • Advanced detection and communication protocol.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.

CONVENTIOAL FIRE ALARM SYSTEM ACCESSORIES

Conventional sounder of Conventional fire alarm system

Conventional Sounder
RE-24CS

  • Slim and Sleek
  • Wall or Ceiling mountable
  • Mini Horn with Back Box
  • 24VDC Operation

They are used in Fire, Burglar & Emergency Alarm System.

Conventional Sounder Cum Strobe of Conventional fire alarm system

Conventional Sounder Cum Strobe
RE-25SS

  • Easy to install.
  • Operates on 24VDC
  • 100db at 30cm.
  • Low Current.
  • Ceiling / Flush Wall Mount.
UL listed conventional sounder of Conventional fire alarm system

Conventional Sounder (UL Listed)
RE-716SO

  • UL 464,UL – S525
  • 2 Audible Tones Settings : Continuous and Temporal 3
  • Wall or Ceiling mountable
  • 24VDC Operation

They are used in Fire, Burglar & Emergency Alarm System

UL listed Conventional Sounder Cum Strobe of Conventional fire alarm system

Conventional Sounder Cum Strobe
(UL Listed)
RE-716SS

  • UL 1971, ULC -S525, UL 464, ULC-S526.
  • Low Current Draw
  • Flexible optic design to meet the light dispersion.
  • 4 candella settings : 15/30/75/110 cd output.
  • 2 audible tone settings : Continuous / Temporal 3.
  • Slim and sleek.

They are used in Fire, Burglar & Emergency Alarm System.

Conventional Manual Call Point
RE-716 MR

  • Alarm status is indicated By Red color LED.
  • Operates on 24 VDC.
  • Green Colored for Emergency Release.
  • Yellow Colored for Abort.
  • 1 No’s of CO & NC Output (Optional)
UL listed conventional manual pull station of Conventional fire alarm system

Conventional Manual Pull Station
(UL Listed)
RE-716P-IT

  • Lift and pull
  • Break glass cover
  • Weather and Explosion proof versions(optional).
  • All stations offer hex screw or key lock access

UL LISTED CONVENTIONAL FIRE ALARM PANEL

UL listed Fire alarm control panel

4 Zone Conventional Fire Alarm Panel
(UL Listed)
RE-2554

The microprocessor based UL listed 4 Zone conventional fire alarm control panel, the system has 16 X 2 LCD character, 4 zones detection circuit, 3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity,wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2554 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, commercial building, and small scale industries. Thus the system is user friendly with includes all standard to ensure ease for use and high reliability.

UL listed 8 zone conventional fire control alarm panel

8 Zone Conventional Fire Alarm Panel
(UL Listed)
RE-2558

The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCD character, 8 zones detection circuit, 3 common potential free contacts & 2 common NAC sounder output, inbuilt RS-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. Thus the system is user friendly with includes all standard to ensure ease for use and high reliability.

900 SERIES CONVENTIONAL FIRE ALARM PANEL

900 series Conventional fire alarm system

Conventional Fire Alarm Panel
(12 Zones to 128 Zones)

The microprocessor based CE mark 12 Zone Conventional fire alarm control panel, the system has 20 X 4 LCD Character with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contact & 2 common NAC Sounder output, inbuilt RS-485 for Networking TCP/IP, peer to peer & repeater connectivity, central monitoring mode poser supply, SMPS & Battery polarity & deep discharge protection.

RE-900 Series fire alarm control panel is designed with unique protocol to be used for small ,medium & Large establishments, Schools ,Hospitals, Hotels ,Banks ,Residential/Commercial building, and small scale industries. Thus this fire alarm system is user friendly and includes all standard to ensure case for use and high reliability.

Zones available- 12,16,20,24,32,48,64,96 and 128 Zones.

Conventional repeater panel for Conventional fire alarm system

Conventional Repeater Panel
(for 900 Series Fire Panel)
RE-9032RP ,RE-9128RP ,RE-9256RP

  • 20 X 4 Dot Matrix LCD display.
  • Alphanumeric keypads.
  • RS-485 Communication for Network Repeater.
  • System ON, AC ON, Battery ON, Charger ON indications.
  • Drill test / Evacuate facility.
  • Lamp test facility.

Maximum 16 Main panels includes repeaters that can connect in a Single Network through RS-485

CLEAN AGENT PANEL AND ACCESSORIES

Accessories of Clean agent fire suppression system

AGENT RELEASE PANEL
RE-120 GR

  • 20 X 4 Dot Matrix LCD display.
  • Alphanumeric keypads.
  • RS-485 Communication for Network Repeater.
  • System ON, AC ON, Battery ON, Charger ON indications.
  • Drill test / Evacuate facility.
  • Lamp test facility.

Maximum 16 Main panels includes repeaters can be connected in a Single Network through RS-485

AGENT RELEASE PANEL
(UL Listed)
RE-25 AR

The Microprocessor based UL Listed Agent release panel has dual function of detection and release of gaseous agent. Also, the system has 16X2 LCD character, 4 zones detection circuit and 2main agent release circuits, it has various logic programmable options, the system has RTC facility, Auto & manual operational facility, solenoid output with ON and OFF timer with solenoid coil monitoring facility, programmable Main output facility, gas inhabit and instant release, manual release with time delay or without time delay and pressure low sensing facilities.Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE- 25AR will have all safety features to prevent accidental release, user friendly programmable options, the system is ideal choice to protect areas like, Server rooms, data centre , paint booths and hazards areas etc. Thus the system is user friendly that includes all standard to ensure ease for use and high reliability.

MANUAL PULL STATION (ABORT)
(UL Listed)
RE-716 PIT (Y)

  • Lift and pull.
  • Break glass cover.
  • Weather and explosion proof version.
  • All station offer hex screw or key low access.

MANUAL PULL STATION (RELEASE)
(UL Listed)
RE-716 PIT (G)

  • Lift and pull.
  • Break glass cover.
  • Weather and explosion proof version.
  • All station offer hex screw or key low access.

MANUAL CALL POINT (ABORT)
RE-716 MY

  • Alarm status is indicated By Red color LED.
  • Operates on 24 VDC.
  • Green Colored for Emergency Release.
  • Yellow Colored for Abort.
  • 1 No’s of CO & NC Output (Optional).

MANUAL CALL POINT (RELEASE)
RE-716 MG

  • Alarm status is indicated By Red color LED.
  • Operates on 24 VDC.
  • Green Colored for Emergency Release.
  • Yellow Colored for Abort.
  • 1 No’s of CO & NC Output (Optional).

RAVEL SPECIAL DETECTORS

DUCT DETECTOR
RE-428 DU-C

  • High efficient single sampling tube
  • Easy to install
  • One-pipe air sampling system
  • Patented venturi pipe and duct housing
  • Test hole on cover
  • Simple service and maintenance

GAS LEAK DETECTOR
RE-386-LP , RE-386-NG ,RE-386-CO

  • Advanced algorithms provide advanced detection, discrimination.
  • Stable gas sensing chamber. No adjustment or replacement required
  • High immunity against unwanted alarms
  • Surface-mount device (SMD) circuit board design
  • 4-wire system operation
  • Detector auto-reset once gas levels fall below alarm threshold levels
  • Internal reed switch for hush and test functions
  • DC 24 V operation
  • N/O alarm relay output
  • 70 dB internal sounder
  • Easy installation and no programming required
  • Connects to zone monitor for use with addressable control and indicating equipment
  • Sleek low-profile housing design
  • Low maintenance

BEAM DETECTOR (UL Listed)
EAZY BEAM DS

Product Overview
This device can be installed easily and quickly by a single person in single point of wiring & commissioning. Further, it has special feature to compensate automatically for natural building movement to continuously maintaining alignment by building movement tracking technology.

Salient Features

  • Auto alignment
  • Easy Installation
  • Standalone Detector

Salient Features

Alignment mode switch, alignment directional buttons and configuration switches for alarm response threshold

  • 2 Green LEDs and 1 Yellow LED for alignment status.
  • System status : Green LED flashing every 10 sec in normal condition
  • Red LED flashing every 10 sec in alarm condition
  • Yellow LED flashing every 10 sec for obscuration or every 5 sec for contamination in Fault condition .
  • Flat front face with enclosed optics.

Cleaning the optics does not affect alignment.

UL Listed.

BEAM DETECTOR
RE-428HR
(100 Meter)

The RE-428 Series beam smoke detector is designed for smoke detection at the start of a fire. And it is especially suitable for protection of indoor spaces, in which the appearance of smoke is likely during ignition of a fire, and where, due to a large space area, installation of a greater number of point smoke detectors would be necessary. The RE-428 Series beam smoke detector and the prism reflector or reflector panel are installed on opposite walls of a room

BEAM DETECTOR
RE-428FR
(50 Meter)

The RE-428 Series beam smoke detector is designed for smoke detection at the start of a fire.Hence it is especially suitable for protection of indoor spaces, in which the appearance of smoke is likely during ignition of a fire, and where, due to a large space area, installation of a greater number of point smoke detectors would be necessary. Moreover, RE-428 Series beam smoke detector and the prism reflector or reflector panel are installed on opposite walls of a room

SINGLE LOOP ADDRESSABLE FIRE ALARM SYSTEM

Addressable fire alarm system

ONE LOOP ADDRESSABLE FIRE ALARM PANEL
MONITI

CE approved – Single Loop Analogue addressable fire alarm panel with 127 devices of any combination with 20 loop powered sounders in addition .supports single repeater panel, Touch key panel with USB inbuilt for Laptop connectivity. Front Panel programmable.

Panel of Addressable fire alarm system

MONITI REPEATER PANEL
MONITI-RP

  • Complies EN54
  • 160 (40X4) character LCD Display
  • RS 485 communication for repeater
  • One Programmable form C relay for fire
  • Extensive built in transient protection
  • Common fire, fault LED indication
Detector of Addressable fire alarm system

ADDRESSABLE SMOKE DETECTOR
RE-337 S

  • Complies with EN 54.
  • Dual LED’s for 360° visibility.
  • Advanced detection and communication protocol.
  • Stable photoelectric smoke sensing chamber.
  • No adjustment or  replacement required
  • Polarity insensitive.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.
  • Simple Soft address programming for Easy installation.
Heat detector of Addressable fire alarm system

ADDRESSABLE HEAT DETECTOR
RE-337 H

  • Complies with En54.
  • Dual LED’s for 360 visibility.
  • Durable sensor.
  • No adjustment or replacement required.
  • Advanced detection and communication protocol.
  • Polarity insensitive.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.
  • Simple Soft address programming for Easy installation.
Multisensor detector of Conventional fire alarm system for Fire detection system

ADDRESSABLE MULTI SENSOR DETECTOR
RE-337 SH

  • Complies with EN 54.
  • Dual LED’s for 360° visibility.
  • Advanced detection and communication protocol.
  • Stable photoelectric smoke sensing chamber.
  • No adjustment or replacement required.
  • Polarity Insensitive.
  • Easy installation and maintenance.
  • Sleek low-profile housing design.
  • Regular 100mm base.
  • Simple Soft address programming for Easy installation.
Module of Addressable fire alarm system

ADDRESSABLE ZONE MODULE
RE-737MZ

  • Inbuilt Isolator.
  • Module Status by RED LED.
  • Analogue Communication with the panel.
  • Module Addressing by Software / 8 way DIP Switches.
  • Low Standby Current.

ADDRESSABLE INPUT OUTPUT MODULE
RE-737MX

  • Inbuilt Isolator.
  • Module Status by RED LED.
  • Analogue Communication with the panel.
  • Module Addressing by Software / 8 way DIP switches .
  • Low Standby Current.
  • Available with suitable back boxes

ADDRESSABLE RELAY MODULE
RE-737MR

  • Inbuilt Isolator.
  • Module Status by RED LED.
  • Analogue Communication with the panel.
  • Module Addressing by Software / 8 way DIP switches .
  • Low Standby Current.
  • Available with suitable back boxes.

ADDRESSABLE MONITOR MODULE
RE-737MM

  • Inbuilt Isolator.
  • Module Status by RED LED.
  • Analogue Communication with the panel.
  • Module Addressing by Software / 8 way DIP switches .
  • Low Standby Current.
  • Available with suitable back boxes.

ADDRESSABLE CONTROL MODULE
RE-737MC

  • Inbuilt Isolator.
  • Module Status by RED LED.
  • Analogue Communication with the panel.
  • Module Addressing by Software / 8 way DIP switches .
  • Low Standby Current.
  • Available with suitable back boxes.

ADDRESSABLE MANUAL CALL POINT
RE-737M

  • Complies EN54-11
  • Type “A” Indoor Use
  • Re-settable by an element kit
  • Suitable for flush or surface mounting
  • Inbuilt – Isolator
  • Soft Addressing using programming tool
  • Low Standby Current

ADDRESSABLE LOOP SOUNDER
RE-24LS

  • Complies EN54-11
  • Type “A” Indoor Use
  • Suitable for flush or surface mounting
  • Inbuilt – Isolator
  • Soft Addressing using programming tool
  • Low Standby Current

MULTI LOOP FIRE ALARM PANEL AND ACCESSORIES

4 LOOP ANALOGUE ADDRESSABLE FIRE ALARM PANEL
(UL Listed)
AVANI

UL listed – Single Loop Expandable Up To 4 Loop Analogue addressable fire alarm panel with 254 devices of any combination in a loop,1016 devices of any combination in a panel, Networkable upto 8 panels in a node. Touch key panel with USB inbuilt for Laptop connectivity. Front panel programmable with Loop redundancy.

LOOP CARD
(UL Listed)
RE-LC

RE-LC Loop Card for AVANI is an intelligent addressable fire alarm control panel. And up to 254 devices can be connected to a single loop card. Also, this loop card can plugged in to slot provided in the motherboard of Main panel (Avani). Thus RE-LC Loop Card is compatible with Addressable Detectors, Manual Call Points, Modules etc., The status of the loop shown by dual colour LED.

PASSIVE REPEATER PANEL
AVANI-RP

The Avani-RP repeater panel is a compact remote unit for Ravel-Avani Intelligent Analogue Addressable fire Alarm panel. It repeats all the indications of FACP in standalone or in network Panel. Also, it has (40X4) 160 character LCD Display.

This repeater is connected to Avani FACP using RS 485 communication network. Any communication fault or any loss in communication due to cable fault is indicated in this repeater panel. Also, the display parameters on this fire alarm system can be selected individually to suit the requirement of each remote area

Detector of Addressable fire alarm system

ADDRESSABLE SMOKE DETECTOR
(UL Listed)
RE-317D-SL

UL Listed Analogue addressable Smoke Sensor detectors with smoke detectors with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360-degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber

Heat detector of Addressable fire alarm system

ADDRESSABLE HEAT DETECTOR
(UL Listed)
RE-317D-HL

UL Listed Analogue addressable Smoke Sensor detectors with smoke detectors with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360-degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber

Multisensor detector of Conventional fire alarm system for Fire detection system

ADDRESSABLE MULTI SENSOR DETECTOR
(UL Listed)
RE-317D-SHL

UL Listed Analogue addressable Multi Sensor detectors with smoke detectors and the combination of heat detectors with the fixed temperature of 59 degrees Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360-degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber

ADDRESSABLE ZONE MODULE
(UL Listed)
RE-717MZ

Zone interface module used to connect the conventional smoke, heat and multi sensor detector to addressable fire alarm control panels also the module is used to integrate with Beam detectors to addressable fire alarm system. Shall have RED colored LED for status indications with 8 digit DIP switch for address settings

ADDRESSABLE INPUT/OUTPUT MODULE
(UL Listed)
RE-717MX

Zone interface module used to connect the conventional smoke, heat and multi sensor detector to addressable fire alarm control panels also the module is used to integrate with Beam detectors to addressable fire alarm system. Shall have RED colored LED for status indications with 8 digit DIP switch for address settings

ADDRESSABLE RELAY MODULE
(UL Listed)
RE-717MR

UL listed control relay module with dual potential free contact to integrate with any third party systems having RED coloured LED for status indications with 8 digit Dip switch for address settings

ADDRESSABLE MONITOR MODULE
(UL Listed)
RE-717MM

UL listed control monitor module with dual potential free contact to integrate with any third party systems having RED coloured LED for status indications with 8 digit Dip switch for address settings

ADDRESSABLE ISOLATOR MODULE
(UL Listed)
RE-717MI

The isolator module to be installed between every 16 devices to isolate the circuit from single short circuit on the analogue addressable loop cable, this is non addressable device with yellow LED for status indications.

ADDRESSABLE CONTROL MODULE
(UL Listed)
RE-717MC

UL Listed Control Module to integrate with Conventional Audible devices like Sounder, Sounder cum strobe, strobe, bell etc., Also having supervisory features for NAC circuit as well as the power supply input. Capable to connect multiple notification devices in single module having RED colored LED for status indications with 8 digit Dip switch for address settings.

GRAPHIC SOFTWARE
AVANI-SOFT

CONTROL MONITORING SOFTWARE
AVANI-CMS

PUBLIC ADDRESS SYSTEM

PUBLIC ADDRESS MAIN CONSOLE
EKONICS

  • 4 audio inputs can configure to any combination of 8 or multiple of 8 outputs.
  • 19” Rack mountable.
  • All-call or zone wise paging.
  • Built-in 12 Programmable DVA/Alarm messages.
  • 40×4 LCD Display.
  • USB 2.0 Interface for PC connectivity.
  • PC based Router configuration.
  • Interface with Avani via RS-485
  • 3 Levels of Password protection.
  • RS485 communication facility.
  • Event log with RTC.
  • User selectable Volume level & 3 Band Equalizer for audio inputs.
  • Zone wise input priority level, permanent input, scheduled digital voice announcer.
  • All field circuits are supervised.
  • Inbuilt 250W Amplifier (2X125W)
  • Zone wise selection through keypad
  • Programmable one form C Relay
  • Zone Selection, Fault status in unambiguous colored LED

PUBLIC ADDRESS MAIN CONSOLE
e'Scape

  • 19”, Rack mountable.
  • System ON, Power Fault, Common fault indications.
  • Membrane Keypad for user friendly operation.
  • Inbuilt 250 watts amplifier.
  • Additional Amplifier can expand up to 250W.
  • One Inbuilt Microphone for announcement.
  • Zone Wise (Speaker line) Selection facility with LED indication.
  • Voice / Alarm / Allcall selection facility
  • MIC mode selection facility.
  • Programmable Mode (Alarm, Mic, Music, DVA) selection facility.
  • 100V audio output for Speaker.
  • Alarm activated on automatically announcing mode.
  • Compatible with Avani via RS 485 Communication.
  • Voice recording option available only with 250w Amplifier combination.
  • DVD Input Facility.
  • Zone expansion in Multiples of 16.

PUBLIC ADDRESS MAIN CONSOLE Revac Nx
 

  • Operates on 220VAC 50 Hz, Main switch mode power supply.
  • Standby backup 24VDC battery.
  • CE approved.
  • 19″, Rack mountable.
  • System ON, Power fault, Common Fault indications.
  • Membrane Keypad for user friendly operation.
  • Inbuilt amplifier maximum 125 / 250 watts can accommodate in a console.
  • It can be integrated with any third party FACP.
  • Additional Amplifier can expand up to 250W.
  • One push to talk Microphone provided for announcement.
  • Zone Wise (Speaker line) Selection facility with LED indication.
  • All loud speaker lines are supervised.
  • Volume level indicator.
  • Voice / Alarm / Allcall / DVA / MIC selection facility
  • Programmable Mode (Alarm, Mic, Music, DVA) Selection facility.
  • 100V audio output for Speaker.
  • Fault Relay output for actuators.
  • Alarm activated on automatically announcing mode.
  • Compatible with RE-900 Series via RS 485 Communication.
  • Voice recording option available.
  • DVD Input Facility using 3.5mm jack.
  • Zone expansion in Multiples of 16, upto 128 Zone.

ZONE EXPANDER
RE-EX Series

  • 24VDC Input voltage
  • 19” 2U Rack mountable.
  • Power ON, Communication, Fault indications.
  • RS-485 Communication with Indication.
  • Membrane Keypad for user friendly operation.
  • Zone Wise (Speaker line) Selection facility with LED indication.
  • 100V audio output for Speaker.
  • Plug Type Connector for easy wiring.
  • Alarm activated on automatically announcing mode.
  • Zones expansion in Multiple of 16.
  •  

125 WATTS AMPLIFIER
RE-125

  • Better Sound quality in Digital format.
  • 19” 2U rack mountable
  • Low power consumption
  • Power on, Audio level Indication.
  • Class D Amplifier
  • Low Heat dissipation.
  • Compact size
  • Better Sound quality in Digital format.

250 WATTS AMPLIFIER
RE-250

  • Better Sound quality in Digital format.
  • 19” 2U rack mountable
  • Low power consumption
  • Power on, Audio level Indication.
  • Class D Amplifier
  • Low Heat dissipation.
  • Compact size
  • Better Sound quality in Digital format.

CEILING SPEAKER
RE-LS10C

  • Flush mount Ø15cm dynamic cone speaker.
  • Three field selectable power taps.
  • ABS plastic grill with metal punched net.
  • Easy to install with spring catch mount.
  • Connectors with screw for hooking up the wires tightly.
  • Protective dust cover at rear.

The white color of the grill has been selected to be obtrusive in virtually all interiors

BOX SPEAKER
RE-LS10W

  • Flush mount  box speaker.
  • Three field selectable power taps.
  • ABS plastic grill with metal punched net.
  • Easy to install with spring catch mount.
  • Connectors with screw for hooking up the wires tightly.
  • Protective dust cover at rear.

The white color of the grill has been selected to be obtrusive in virtually all interiors.

BOX SPEAKER
RE-LS20W

  • Wall mounted box speaker for announcement and paging.
  • Attractive, stylish ABS white plastic box.
  • Cost effective high power PA box.
  • The specially designed sculptured edge offer both style and protection.
  • Equipped with the transformer to provide tappable 100V line.
  • Provision to connect with 100V line and 4 ohms.
  • Optional Volume control.

BOX SPEAKER
RE-LS6W

  • Wall mounted with box speaker for announcement and paging.
  • Attractive, stylish ABS white plastic box.
  • The specially designed slim speaker is obtrusive in all interiors.
  • Equipped with the transformer to provide 100v line.
  • Ideal for office cabin, work stations, classrooms, shops, malls etc.
  • Optional Volume control.

DYNAMIC CONE SPEAKER
RE-LS30B

Two 10 CM Dynamic cone speakers fitted at both the ends of the unit suitable for both speech and music providing quality sound for all requirements.

  • Three field selectable power taps.
  • Fitted with an adjustable U bracket for easy installation.
  • Ideal for installation in covered areas which are not susceptible to rain or excessive dampness.
  • Better sound quality for paging, announcement and background music.
  • ABS plastic grill at both the ends finished with matt grey.

HORN TYPE SPEAKER
RE-LU100XT

  • HORN FLARE – ABS RESIN, OFF WHITE
  • REFLECTOR HORN – ABS RESIN, DARK GRAY
  • REAR COVER – ABS RESIN, DARK GRAY
  • ‘U’ BRACKET – C.R.C., DARK GRAY, POWDER COATING
  • SCREWS AND BOLTS – M.S.
  • SPEAKER CABLE – P.V.C. CABLE

FIREMAN TELEPHONE SYSTEM

FIRE TELEPHONE MAIN CONSOLE
RE-EK740

  • Master to remote and remote to master calling facility
  • Fully monitored for open and short circuit cable failures.
  • Remotes connected via 2 core radial.
  • Complies with BS5839 Pt.9 2002
  • Conference call facility

FIRE TELEPHONE HANDSET
RE-EK750H

  • MS Box
  • Coiled Cord set
  • Wall mounting
  • Telephone handset is compatible with 6.5mm jack / RJ11 telephone plug.
  • Size of cabinet:( 300 H X 200 W X 100 D) mm

FIRE TELEPHONE JACK
RE-EK750J

  • Stainless Steel Enclosure
  • Any number telephone jack can be daisy chain. However only one can be operated at a time per zone.
  • Flush / Wall mountable.
  • 4.5 mm or 6.5 mm(2 terminal) or RJ11 Jack.

Contact us today for fire alarm system in Mumbai.